How to Cut Laminate Countertops with a Table Saw

Laminate countertops have become an increasingly popular choice for homeowners due to their affordability and durability. However, cutting laminate can be a tricky business, especially when it comes to getting the right size and shape.

In this post, we’ll be taking a closer look at how to cut laminate countertops with a table saw, so you can achieve professional-looking results every time.

Step 1: Measure the Countertop

Before you start cutting, accurately measure the space where you intend to install the countertop. Once you have the right measurements, mark the lines you want to cut on the laminate using a chalk line or marker. This will prevent you from veering off course while you’re cutting.

Step 2: Cut the Strip

Next, take your table saw, and adjust the saw blade to the width of the cut you want to make. Then, place the countertop strip on the saw, making sure to align the marked line with the blade. You’ll want to make sure that the laminate side is facing up. Finally, push the strip through the table saw slowly and steadily, being sure to keep your fingers well clear of the blade.

Step 3: Cut the Sink Hole

Once you’ve cut your strips, you’ll need to create the sink hole. To do this, mark the position of the hole precisely on the countertop. You can use a template or improvised jig for this, just make sure it is stable and will not move during cutting. Use a hole saw or jigsaw to cut out the sink hole. Again, be careful while cutting, and take your time.

Step 4: Create the Edges

Now it’s time to create the edges for your laminate countertop. To do this, mount the router upside down, and insert a straight bit into it. Once that’s done, adjust the depth, so the bit extends an eighth of an inch below the base. Push the countertop evenly against the bit, and move it gently from left to right.

Step 5: Install Your Laminate Countertop

Now that you’ve followed all the steps listed above, you’re ready to install your new laminate countertop. Begin by clamping it into position. Then, use a drill to attach the countertop to the cabinets. Finally, add the finishing touch with silicone to seal the edge between the countertop and cabinets.


Cutting laminate can seem like a daunting task, but by following our guide, you’ll be able to make precise cuts every time. It’s important to take your time and pay close attention to the steps, so you don’t make any mistakes. Always wear protective gear like goggles and a dust mask while cutting, and be sure to use caution when handling the table saw.

With these tips in mind, you’re ready to get started on your next custom laminate countertop project.

Ronald Cantrell

My name is Ronald and I'm a passionate home tools blogger who loves to help people find the perfect tools for their homes. I'm constantly on the lookout for the latest and greatest products so people can make informed decisions when it comes to their DIY projects. In my spare time, I like to tinker around with projects of my own and put my knowledge of tools to the test.

Click Here to Leave a Comment Below 0 comments